Siemens ADSL SL2-141- Mozilla Firefox nmyn Siemens ADSLsL2-141 search SIEMENS Connect to T Interne© Quick Setup Firmware -Ole - Quick Start Status. Shell Access for Alice-DSL’s Siemens SL2-141-I. With my Alice-DSL subscription was a Siemens-branded Broadcom ADSL router, SL2-141. My firmware is 3. Mar 10, 2009  Hi My friend have a Nokia Siemens SL2_141 Wifi ADSL Modem. He forgot his Modem (not DataOne) password, he changed it himself, so I. View and Download Siemens SL2-141-I quick start manual online. ADSL WLAN Router. SL2-141-I Network Router pdf manual download.

1. Siemens Adsl Sl2-141 Firmware Update
2. Siemens Adsl Sl2-141-i Firmware
3. Siemens Adsl Sl2 141 I Firmware Download
4. Siemens Adsl Sl2 141 I Firmware Update Download
5. Siemens Adsl Sl2-141 Firmware Upgrade

SL2-141/SL2-141-I ADSL Router. User’s Manual. ³ Firmware upgrades through HTTP, TFTP, or FTP ³ The boot loader contains very simple web page to allow the.

• 5

  Adsl Compliance
• 5

  Adsl2 Compliance
• 6

  Atm Features
• 6

  Bridging Features
• 6

  Routing Features
• 7

  Security Features
• 7

  Configuration and Management
• 8

  Subscription for Adsl Service
• 9

  Physical Outlook
• 9

  Front Panel
• 9

  Led Indicators
• 10

  Rear Panel
• 11

  System Requirement
• 11

  Choosing a Place for the Adsl Router
• 12

  Connecting the Adsl Router
• 13

  Install the Usb Driver
• 15

  For Windows Xp
• 17

  For Windows Vista
• 25

  Uninstall the Usb Driver
• 26

  For Windows 2000
• 39

  For Windows 98
• 42

  For Windows Me
• 43

  For Windows Nt
• 51

  Configure Pc to Get Ip Address From Dhcp
• 54

  Windows Vista
• 54

  Renew Ip Address On Client Pc
• 54

  For Windows 98Me
• 61

  Ppp Over Atm
• 73

  Bridge Mode
• 75

  Outline of Web Manager
• 75

  To Have the New Settings Take Effect
• 76

  Quick Start
• 76

  Connect to Internet
• 76

  Quick Setup
• 76

  Connection Type
• 81

  Ip Over Atm
• 87

  Adsl Line
• 87

  Adsl Ber Test
• 88

  Internet Connection
• 88

  Traffic Statistics
• 88

  Dhcp Table
• 89

  Wireless Client
• 89

  Routing Table
• 89

  Arp Table
• 90

  Advanced Setup
• 97

  Configuring Other Routers On Your Lan
• 101

  Ip Address Seen By Internet Users
• 102

  Connecting to the Virtual Servers
• 107

  Quality of Service
• 109

  Port Mapping
• 121

  Access Controls
• 124

  Admin Account
• 124

  Remote Access
• 125

  System Log
• 125

  Configure System Log
• 126

  Viewing System Log
• 127

  Snmp Setting
• 128

  Backup Config
• 128

  Update Firmware
• 128

  Reset Router
• 131

  Problems With Lan
• 131

  Problems With Wan
• 132

  Problems With Upgrading
• 134

  Private Ip Address
• 134

  Virtual Server

• Ernest James
• 2 years ago
• Views:

Transcription

1 SL2-141/SL2-141-I ADSL Router User s Manual Rev: /03/30 No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. This manual currently suits for SL2-141/SL2-141-I.

2 Safety Notes For Installation For Using Use only the type of power source indicated on the marking labels. Use only power adapter supplied with the product. Do not overload wall outlet or extension cords as this may increase the risk of electric shock or fire. If the power cord is frayed, replace it with a new one. Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, which are intended for ventilation and proper operation. It is recommended to mount the product with a stack. Do not place the product near any source of heat or expose it to direct sunlight. Do not expose the product to moisture. Never spill any liquid on the product. Do not attempt to connect with any computer accessory or electronic product without instructions from qualified service personnel. This may result in risk of electronic shock or fire. Do not place this product on unstable stand or table. Power off and unplug this product from the wall outlet when it is not in use or before cleaning. Pay attention to the temperature of the power adapter. The temperature might be high. After powering off the product, power on the product at least 15 seconds later. Do not block the ventilating openings of this product. When the product is expected to be not in use for a period of time, unplug the power cord of the product to prevent it from the damage of storm or sudden increases in rating. For Service Warning Caution Do not attempt to disassemble or open covers of this unit by yourself. Nor should you attempt to service the product yourself, which may void the user s authority to operate it. Contact qualified service personnel under the following conditions: If the power cord or plug is damaged or frayed. If liquid has been spilled into the product. If the product has been exposed to rain or water. If the product does not operate normally when the operating instructions are followed. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance. This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. ii

3 ADSL Router User Manual FCC This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. FCC Class B Notice IC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing ICES-003 Class B Notice - Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. iii

4 iv Contents

5 Preface Preface Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL) Router. With the asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows you to have both voice and data services in use simultaneously all over one phone line. SL2-141/SL2-141-I Wireless ADSL2+ Router is a DSL broadband access device which allows ADSL connectivity while providing g wireless LAN capabilities for home or office users. It supports ADSL2/ADSL2+ and is backward compatible to ADSL, even offers auto-negotiation capability for different flavors (G.dmt, G.lite, or T1.413 Issue 2) according to central office DSLAM s settings (Digital Subscriber Line Access Multiplexer). Also the feature-rich routing functions are seamlessly integrated to ADSL service for existing corporate or home users. Now users can enjoy various bandwidth-consuming applications via SL2-141/SL2-141-I Wireless ADSL2+ Router. Features ADSL Compliance ANSI T1.413 Issue 2 ITU G Annex A (G.dmt) ITU G Annex A (G.lite) ITU G (G.hs) Support dying gasp Maximum Rate: 8 Mbps for downstream and 1 Mbps for upstream ADSL2 Compliance ITU G Annex A (G.dmt) ITU G Annex A (G.lite) Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream ADSL2+ Compliance ITU G Annex A (G.dmt) Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream Wireless LAN Compliance Features IEEE g and IEEE b Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for g/11, 5.5, 2, 1 Mbps for b Modulation Technique: OFDM for g; CCK (11 Mbps, 5.5 Mbps) for b; DQPSK (2Mbps) for b; DBPSK (1 Mbps) for b v

6 ADSL Router User Manual vi Network Architecture: infrastructure Operating Frequency: 2.4 ~ 2.5 GHz Operating Channels: depending on local regulations. For example, 11Channels (Northern America), 13 Channels (Europe), and 14 Channels (Japan) RF Output Power: 13.5+/-1.5dBm for g; 17.5+/-1.5dBm for b The output power can be adjustable. Antenna Connectors: Hardware diversity support. One external and one internal antenna are provided. Coverage Area: 300m Support WEP (Wired Equivalent Privacy) mechanism which uses RC4 with 64-bit or 128-bit key length Support 802.1x and WPA/WPA2 Support the Access Control function: only registered WLAN clients are allowed to associate to this device SSID can be hidden for the security issue (Don t broadcast SSID) Support the Repeater function to extend the coverage area Support wireless user isolation for the hotspot ATM Features Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs) Support up to 16 PVCs for UBR, CBR, VBR-nrt, VBR-rt with traffic shaping RFC2684 LLC Encapsulation and VC Multiplexing over AAL5 RFC2364 Point-to-Point Protocol (PPP) over AAL5 RFC2225 Classical IP and ARP over ATM RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding and Client functions) Support PPPoA or PPPoE Bridged mode (the IP address got from ISP can be passed to the user s PC and behave as the IP address of the user s PC.) OAM F4/F5 End-to-End/Segment Loopback Cells Bridging Features Supports self-learning bridge specified in IEEE 802.1D Transparent Bridging Supports up to 4096 learning MAC addresses Transparent Bridging among 10/100 Mb Ethernet and g wireless LAN Support Virtual LAN function specified in IEEE 802.1q Routing Features Compliance to IPv4 which include RFC791, RFC792, RFC826, RFC768, and RFC793 NAT (Network Address Translation) / PAT (Port Address Translation) let multiple users (up to 128) on the LAN to access the Internet for the cost of only one IP address. ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger, FTP, Quick Time, mirc, Real Player, CuSeeMe, VPN pass-through with multiple sessions, etc. Port Forwarding: the users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on user s local network. Support DMZ UPnP IGD (Internet Gateway Device) with NAT traversal capability

7 ADSL Router User Manual Static routes, RFC1058 RIPv1, and RFC1723 RIPv2 DNS Relay, Dynamic DNS DHCP Client/Relay/Server Time protocol can be used to get current time from network time server Support IGMP Proxy/Snoop Support IP/Bridge QoS for prioritize the transmission of different traffic classes Support port mapping function which allows you to assign all data traffic transmitted among specific Internet connections and LAN ports Security Features PAP (RFC1334), CHAP (RFC1994), and MS-CHAP for PPP session Firewall support IP packets filtering based on IP address/port number/protocol type Bridge packet filtering (optional) URL filtering (optional) Support DoS (Deny of Services) which detect & protect a number of attacks (such as SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan, etc) Configuration and Management User-friendly embedded web configuration interface with password protection Remote management access control via HTTP, TFTP, FTP, Telnet, SSH, SNMP Telnet session for local or remote management Firmware upgrades through HTTP, TFTP, or FTP The boot loader contains very simple web page to allow the users to update the run-time firmware image. Configuration file backup and restore SNMPv1/v2 agent with MIB-II, ADSL Line MIB Unpacking Check the contents of the package against the pack contents checklist below. If any of the items is missing, then contact the dealer from whom the equipment was purchased. ADSL Router Power Adapter and Cord RJ-11 ADSL Line Cable RJ-45 Ethernet Cable Quick Start Guide Driver & Utility Software CD vii

8 ADSL Router User Manual Subscription for ADSL Service To use the ADSL Router, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP: If you apply for dial-up connection, you will be given an Internet account with username and password. You will get a dynamic IP by dialing up to your ISP. Static IP address: If you apply for full-time connectivity, you may get either one static IP address or a range of IP addresses from your ISP. The number of IP addresses varies according to different ADSL service provider. viii

9 Chapter 1: Overview Chapter 1: Overview This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first. Physical Outlook Front Panel The following illustrations show the front panel of the ADSL Router (with USB interface and without USB interface): LED Indicators The ADSL Router is equipped with five LEDs on the front panel as described in the table below (from left to right): LED Color Status Description WLAN Green Unlit Power off or no radio signal (WLAN card is not present or fails to function). USB Ethernet 1-4 PPP DSL Green Green Green Green Blinking Solid Unlit Blinking Solid Unlit Blinking Solid Unlit Solid Unlit Blinking Solid Traffic is going through Wireless LAN interface. Wireless LAN interface ready to work. Power off or wait for USB connection going up. User data is going through USB port. USB connection is OK. Power off or no Ethernet carrier is present. Ethernet carrier is present and user data is going through Ethernet port. Ethernet carrier is present. No PPPoA or PPPoE connection At least one PPPoA or PPPoE connection is up. The users can access the Internet now. Power off or ADSL line connection is handshaking or training is in progress. User data is going through ADSL port. ADSL line connection is OK. 1

10 ADSL Router User Manual LED Color Status Description Power Green Unlit Power off. Solid Power on. Rear Panel The following figures illustrate the rear panel of your ADSL Router. Connector Description 12VAC 12VAC Power connector Power switch Ethernet 1-4 Ethernet RJ-45 connector USB USB connector (for the model with USB interface only) DSL RJ-11 connector 2

11 Chapter 2: System Requirement and Installation Chapter 2: System Requirement and Installation System Requirement To access the ADSL Router via Ethernet, the host computer must meet the following requirements: With Ethernet network interface. Must have TCP/IP installed. Set client PC with obtain an IP address automatically or set fix IP address. With a web browser installed: Internet Explorer 5.x or later. The ADSL Router is configured with the default IP address of and subnet mask of As the DHCP server is Enable by default, The DHCP clients should be able to access the ADSL Router. Or you could assign an IP address to the host PC first for initial configuration. You also can manage the ADSL Router through a web browser-based manager: ADSL ROUTER CONTROL PANEL. The ADSL Router manager uses the HTTP protocol via a web browser to allow you to set up and manage the device. To configure the device via web browser, at least one properly-configured PC must be connected to the network (either connected directly or through an external hub/switch to the LAN port of the device). Choosing a place for the ADSL Router Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach it easily. Avoid placing the device in places where people may walk on the cables. Also keep it away from direct sunlight or heat sources. Place the device on a flat and stable stand. 3

12 ADSL Router User Manual Connecting the ADSL Router Follow the steps below to connect the related devices. Connecting the ADSL line. Connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your ADSL Router. Connect the other end of the cable to the Ethernet port of the client PC. Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to a power outlet. Turn on the power switch. 4

13 Chapter 3: Configuration For connecting through a hub, please refer to the following diagram for an example. Install the USB Driver For Windows ME Run the USB installation program from the CD provided by your device package. An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically. Now, the system will copy the proper files for this device. When the file copying finished, the dialog above will close. Now the USB driver is installed properly. You can use the device. For Windows 2000 Run the USB installation program from the CD provided by your device package. 5

14 ADSL Router User Manual An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. 6

15 Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically. Now, the system will copy the proper files for this device. When the file copying finished, the dialog above will close. The InstallShield Wizard Complete appears, click Finish. Now the USB driver is installed properly. You can use the device. For Windows XP Run the USB installation program from the CD provided by your device package. An InstallShield Wizard will appear. Please wait for a moment. 7

16 ADSL Router User Manual When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically. 8

17 Chapter 3: Configuration The system is trying to find proper driver for your device and copying the files automatically. After the file copying is finished, a completing message will appear. You can use the device now. For Windows Vista For Vista users, please press Continue whenever a prompted window asking for permission to continue during USB driver installation process (see the figure below for example). To install the USB driver before connect the router to the PC, here provides two methods. Method One Use the driver CD came with the product package. Run the USB installation program on the CD provided in your router package. An InstallShield Wizard will appear. Please wait for a moment. 9

18 ADSL Router User Manual When the welcome screen appears, click Next for the next step. When the complete message of InstallShield Wizard appears, click Finish. Link your router and the PC with a USB cable. The system will detect the USB driver automatically. 10

19 Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. After the file copying finished, a completing message will appear. You can use the router now. 11

20 ADSL Router User Manual Method Two Run a silent installation. Copy the USB driver folder from the driver CD to somewhere on the PC. (In our example, the driver files are put under D:Siemens WHQLed.) Open Start menu, key in cmd in the blank and press enter. Then click cmd. Then click the icon. Key in cmd and press Enter. When the Command Prompt screen appears, point to the driver folder on your PC, and then enter setup -s. Press enter to start silent installation. The system will install the driver automatically. You can connect your router and the PC with a USB cable now. The system will detect the USB driver automatically. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. After the file copying finished, a completing message will appear. You can use the router now. 12

21 Chapter 3: Configuration Method Three If the USB driver has not been installed yet, you can also connect the router to the PC with a USB cable and wait for Universal Plug and Play device to detect the router, and then install the driver. Plug the USB cable into the USB port on the PC. A Found New Hardware window will appear. Press Locate and install driver software (recommended). Then insert the USB driver CD provided in your router package into the PC, and press Next. The system will search disc for the USB driver needed and then complete the installation. 13

22 ADSL Router User Manual Or if you do not have a disc, but have the driver files on your PC, you can follow the steps below: Press I don t have the disc. Show me other options. Select Browse my computer for driver software (advanced). Press Browse to set the path for the driver file, and then press Next. Wait while the system installing the driver. 14

Siemens Adsl Sl2-141 Firmware Update

23 Chapter 3: Configuration Now the driver software is installed successfully. Press Close to start using the router. To make sure the USB driver for your router is properly installed, please do the following steps. 1. Open the Start menu and press Control Panel. 2. On the Control Panel folder, click System and Maintenance. 15

24 ADSL Router User Manual 3. Press System. 4. Click Device Manager. 5. Confirm that the Siemens ADSL Router USB Remote NDIS Device (BCM63xx Based) is 16

25 Chapter 3: Configuration on the Network adapters list. Uninstall the USB Driver For Windows ME For uninstall the USB driver, please do the following. The first way: Choose Programs Siemens Broadband Uninstall Siemens ADSL Router USB Driver from the Start menu. The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. The second way: Choose Settings Control Panel from the Start menu. Choose Add/Remove Programs. A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove. The InstallShield Wizard dialog will appear. Unplug the USB cable between your device and your PC. Then click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish 17

26 ADSL Router User Manual For Windows 2000 For uninstall the USB driver, there are two ways to do it. Please do as the following: The first way: Choose Programs Siemens Broadband Uninstall Siemens ADSL Router USB Driver from the Start menu. The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC. 18

27 Chapter 3: Configuration When the Unsafe Removal of Device screen appears, the USB driver is removed successfully. Click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. 19

28 ADSL Router User Manual The second way: Choose Settings Control Panel from the Start menu. Choose Add/Remove Programs. A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove. 20

29 Chapter 3: Configuration The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC. Then click OK. 21

30 ADSL Router User Manual When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. For Windows XP For uninstall the USB driver, there are two ways to do it. Please do as the following: The first way: Choose Programs Siemens Broadband Uninstall Siemens ADSL Router USB Driver from the Start menu. 22

31 Chapter 3: Configuration The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC. When the Unsafe Removal of Device screen appears, the USB driver is removed successfully. Click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. 23

32 ADSL Router User Manual The second way: Choose Settings Control Panel from the Start menu. Choose Add/Remove Programs. A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove. 24

33 Chapter 3: Configuration The InstallShield Wizard dialog will appear. Unplug the USB cable between your device and your PC. Then click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. For Windows Vista For Vista users, please press Continue whenever a prompted window asking for permission to continue during USB driver uninstallation process (see the figure below for example). 25

34 ADSL Router User Manual To uninstall the USB driver, there are two ways to do it. Please follow the instructions. Method One: Remove from Device Manager. Choose Start menu, and then select Control Panel. Click System and Maintenance. Press System. 26

35 Chapter 3: Configuration Click Device Manager. Right click Askey ADSL Router USB Remote NDIS Device on the Network adapters list, and press Uninstall. Click OK when the Confirm Uninstall window appears. 27

36 ADSL Router User Manual Remember to unplug the USB cable before continue the uninstallation, or you will see the reminder as follows. Unplug and press OK. When the Confirm Device Uninstall screen show up, check Delete the driver software for the device and click OK to continue. Wait while the system is uninstalling. When the uninstallation is finished, the icon of this router under network adapter list will disappear. Method Two uninstall from program list 28

37 Chapter 3: Configuration Note: If your USB driver is installed by UPnP device, you can only use method one (via the Device Manager) to uninstall, because the installed driver will not be shown on the program list. Unplug your USB cable between your router and your PC. Choose Start menu, and open Control Panel folder. Click Uninstall a program. If the driver name is not on the list, click Refresh button or F5 to update the information. To remove the driver, select it, and then press Uninstall. Refresh button Then the system will start to uninstall the USB driver software automatically. When Maintenance Complete window shows up, click Finish to exit. 29

38 ADSL Router User Manual The USB driver is successfully removed now. Setting TCP/IP In order to access the Internet through the router, each host on your network must install/setup TCP/IP. Please follow the steps below for select a network adapter. 30

39 Chapter 3: Configuration For Windows Click on the Start menu, point to Settings and click on Control Panel. 2. Double-click the Network icon 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click Add. Option 2: If you have TCP/IP protocol, go to Step 6 Your network interface card. Check out if TCP/IP for your NIC is installed or not. 4. Highlight Protocol and click Add. 31

40 ADSL Router User Manual 5. On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click OK 6. When returning to Network window, highlight TCP/IP protocol for your NIC and click Properties. 7. On IP Address tab: Enable Specify an IP address option. Enter the IP Address: x (x is between 2 and 254) and Subnet Mask: as in figure below. On Gateway tab: Add a gateway IP address: and click OK 32

41 Chapter 3: Configuration 8. When returning to Network window, click OK 9. Wait for Windows copying files. 10. When prompted with System Settings Change dialog box, click Yes to restart your computer. 33

42 ADSL Router User Manual For Windows ME 1. Click on the Start menu, point to Settings and click on Control Panel. 2. Double-click the Network icon. 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click Add. Option 2: If you have TCP/IP protocol, go to Step Highlight Protocol and click Add. 5. On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click OK. 6. While returning to Network window, highlight TCP/IP protocol for your NIC and click Properties. 7. On the IP Address tab, select Specify an IP address. Enter the IP address: x (x is between 2 and 254), Subnet Mask: and Default gateway: Then click OK. 8. While returning to the Network window, click OK. 34

43 Chapter 3: Configuration 9. Wait for Windows copying files. 10. When prompted with the System Settings Change dialog box, click Yes to restart your computer. For Windows NT 1. Click Start, point to Settings, and then click Control Panel. 2. Double-click the Network icon. 3. The Network window appears. On the Protocols tab, check out the list of installed network components. Option 1: If you have no TCP/IP Protocol, click Add. Option 2: If you have TCP/IP Protocol installed, go to Step Highlight TCP/IP Protocol and click OK. 35

44 ADSL Router User Manual 5. Click Yes to use DHCP. 6. Insert the Windows NT CD into your CD-ROM drive and type the location of the CD. Then click Continue. 7. Returning to the Network window, you will find the TCP/IP Protocol among the list. Select TCP/IP Protocol and click Properties. 8. Enable Specify an IP address option. Enter the IP Address: x (x is between 2 and 254) and Subnet Mask: and Default Gateway: as in figure below. 36

45 Chapter 3: Configuration 9. When returning to Network window, click Close. 10. When prompted with Network Settings Change dialog box, click Yes to restart your computer. 37

46 ADSL Router User Manual For Windows From the Start menu, point to Settings and then click Network and Dial-up Connections. 2. Right-click the Local Area Connection icon and then click Properties. 3. On the General tab, check out the list of installed network components. Option 1: If you have no TCP/IP Protocol, click Install. Option 2: If you have TCP/IP Protocol, go to Step 6. 38

47 Chapter 3: Configuration 4. Highlight Protocol and then click Add. 5. Click Internet Protocol (TCP/IP) and then click OK. 6. When returning to Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then click Properties. 7. Under the General tab, enable Use the following IP Address. Enter the IP address: x (x is between 2 and 254), Subnet Mask: and Default gateway: Then click OK. 39

48 ADSL Router User Manual For Windows XP From the Start menu, point to Control Panel and then click Network and Internet Connections. Click Network Connection and then click Properties. Click Network Connection and then click Properties.3.On the General tab, check out the list of installed network components. Option 1: If you have no TCP/IP Protocol, click Install. Option 2: If you have TCP/IP Protocol, go to Step 6. Highlight Protocol and then click Add. Click Internet Protocol(TCP/IP) and then click OK. On the Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then click Properties. Under the General tab, enable Use the following IP address. Enter the IP address: x (x is between 2 and 254), Subnet Mask: and Default gateway: Then click Ok. 40

49 Chapter 3: Configuration For Windows Vista 8. Open the Start menu, point to Control Panel and click it. 9. Click Network and Internet. 10. Select Network and Sharing Center. 41

50 ADSL Router User Manual 11. Click Manage Network Connection on the left side. 12. Right click Local Area Connection and select Properties. 13. On the Networking tab, you will find Internet Protocol Version 6 and Version 4. Contact your ISP to confirm which one will be used. (We take TCP/IPv4 for example here.) Select Internet Protocol Version 4 (TCP/IPv4) and press Properties. 42

51 Chapter 3: Configuration 14. Under the General tab, select Obtain an IP address automatically, and Obtain DNS server address automatically. Then click Ok to exit. Configure PC to get IP address from DHCP If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should configure the client PCs to obtain a dynamic IP address. Please follow the previous section to install TCP/IP component. Only that you do not need to specify an IP address when configuring TCP/IP properties. The following section describe the procedures for CPEs to get IP address: For Windows 98 On the IP Address tab, select Obtain an IP address automatically. Then click OK. For Windows ME 43

52 ADSL Router User Manual On the IP Address tab, select Obtain an IP address automatically. Then click OK. For Windows NT On the IP Address tab, click on the drop-down arrow of Adapter to select required adapter. Enable Obtain an IP address from a DHCP server and then click OK.. When prompted with the message below, click Yes to continue. For Windows

53 Chapter 3: Configuration Enable Obtain an IP address automatically and then click OK. 45

54 ADSL Router User Manual For Windows XP On the IP Address tab, select Obtain an IP address automatically. Then click OK. Windows Vista On the IP Address tab, select Obtain an IP address automatically. Then click OK. Renew IP Address on Client PC There is a chance that your PC does not renew its IP address after the ADSL Router is on line and the PC cannot access the Internet. Please follow the procedures below to renew PC s IP address. For Windows 98ME 46

55 Chapter 3: Configuration 1. Select Run from the Start menu. 2. Type winipcfg in the dialog box and the click OK. 3. When the figure below appears, click Release and then Renew to get an IP address. For Windows NT 1. Select Run from the Start menu. 2. Select Run from the Start menu. 47

56 ADSL Router User Manual 3. Type cmd in the dialog box and the click OK. 4. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 5. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ipconfig /renew to get a new one. 48

57 Chapter 3: Configuration For Windows From the Start menu, point to Programs, Accessories and then click Command Prompt. 2. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 3. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ipconfig /renew to get a new one. For Windows XP 1. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 2. From the Start menu, point to Programs, Accessories and then click Command Prompt. 3. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 4. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ipconfig /renew to get a new one. 49

58 ADSL Router User Manual For Windows Vista 1. Open the Start menu, and type cmd in the text box then click OK. 2. The command prompt window will appear. 3. Type ipconfig at the command window and press Enter to view the computer s IP information from DHCP server. 4. If the computer is holding a current IP address, type ipconfig /release to let go of the address, then type ipconfig /renew to obtain a new one. 50

59 Chapter 3: Configuration Note: If you cannot release the IP address successfully and see the message The requested operation requires elevation, please go to the Start menu and right click Command Prompt, then set Run as administrator. Press Continue when a dialog asking for permission to continue prompts. After then, repeat the above instruction to release and renew the IP address. 51

60 Chapter 3:Connecting and Accessing Internet Chapter 3: Connecting and Accessing Internet This chapter is to help you accessing into Internet with a quick and convenient way. If you need more detailed information for web configuration, please get into the next chapter for the advanced configuration. Prior to configuring the ADSL Router, you must decide whether to configure the ADSL Router as a bridge or as a router. This chapter presents some deployment examples for your reference. Each mode includes its general configure procedures. For more detailed information about web configuration, refer to 'Web Configuration'. PPP over ATM (PPPoA) PPPoA IP Extenstion PPP over Ethernet (PPPoE) PPPoE IP Extension Numbered IP over ATM (IPoA) Numbered IP over ATM (IPoA)+NAT Unnumbered IP over ATM (IPoA) Unnumbered IP over ATM (IPoA)+NAT Bridging For making sure that you can connect the ADSL to your computer well and get into Internet successfully, please make sure the following first. Make sure you have installed a network interface card into your computer. Make sure the connection between the ADSL and your computer is OK. Check to see the TCP/IP protocol and set the IP address as Auto Get IP Address. When you are sure all above is Ok, you can open the Browser and type in and start to do the web configuration with different connection modes. This chapter is going to introduce the function of each connection mode and tell you the basic configuring steps that you have to do. If you did not follow the configuring steps for using these connection modes, you might get some connection problems and cannot connect to Internet well. 52

61 Chapter 3:Accessing Internet PPP over ATM (PPPoA) Mode Dynamic Public IP assigned by BRAS Default Private IP ISP (Internet Service Provider) STM-1 Loop Ethernet AAA BRAS DSLAM ADSL Router Hub RDAIUS Server *BRAS: Broadband Remote Access Server PPP over ATM PPPoA+NAT+DHCP on Private LAN PC(S) Description: In this deployment environment, the PPPoA session is between the ADSL WAN interface and BRAS. The ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs will get private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism will translate the IP information for clients to access the Internet. Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Type in the VCI and VPI value. Then click the Next button. eg: VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the PPP over ATM (PPPoA) then click the Next button. 4. In the WAN IP Settings page, select Obtain an IP address automatically and check Enable NAT box. Click Next. 5. In the PPP Username and Password page, enter the PPP username and password that you got from your ISP. Select Dial on Demand and type in the number for inactivity timeout. The default is 20. Or select Always on. Then click Next. 6. In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Check DHCP Server on box. And type in the start and end points. Then type in the leased time that you want. And click Next. eg: Primary IP address: Subnet Mask: Start IP Address: End IP Address: Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 53

62 ADSL Router User Manual PPP over ATM (PPPoA) IP Extension Mode Default Private IP ISP (Internet Service Provider) STM-1 Loop Ethernet Dynamic Public IP assigned by BRAS AAA BRAS DSLAM ADSL Router Hub PC RDAIUS Server *BRAS: Broadband Remote Access Server PPP over ATM PPPoA+NAT+DHCP on Private LAN Description: In this deployment environment, the PPPoA session is between the ADSL WAN interface and BRAS. The ADSL Router acts as a bridge and gets a public IP address from BRAS for your computer. And only the one that got the public IP address is allowed to access into Internet. Moreover, no NAT translation will be done at this case. Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Advanced - Internet - Connections. And click Add. 3. Type in the VCI and VPI value. Then click the Next button. eg: VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the PPP over ATM (PPPoA) then click the Next button. 5. In the WAN IP Settings page, select Obtain an IP address automatically, uncheck Enable NAT box and check PPP IP extension then click Next. 6. In the PPP Username and Password page, enter the PPP username and password that you got from your ISP. Select Dial on Demand and type in the number for inactivity timeout. The default is 20. Or select Always on. Then click Next. 7. In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. And click Next. eg: Primary IP address: Subnet Mask: Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 54

63 Chapter 3:Accessing Internet PPP over Ethernet (PPPoE) Mode Dynamic Public IP assigned by BRAS Default Private IP ISP (Internet Service Provider) STM-1 Loop Ethernet AAA BRAS DSLAM ADSL Router Hub RDAIUS Server *BRAS: Broadband Remote Access Server PPP over Ethernet PPPoE+NAT+DHCP on Private LAN PC(S) Description: In this deployment environment, the PPPoE session is between the ADSL WAN interface and BRAS. The ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs will get private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism will translate the IP information for clients to access the Internet. Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Type in the VCI and VPI value. Then click the Next button. eg: VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the PPP over Ethernet (PPPoE) then click the Next button. 4. In the WAN IP Settings page, select Obtain an IP address automatically and check Enable NAT box. Click Next. 5. In the PPP Username and Password page, enter the PPP username and password that you got from your ISP. Select Dial on Demand and type in the number for inactivity timeout. The default is 20. Or select Always on. Then click Next. 6. In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Check DHCP Server on box. And type in the start and end points. Then type in the leased time that you want. And click Next. eg: Primary IP address: Subnet Mask: Start IP Address: End IP Address: Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 55

64 ADSL Router User Manual PPP over Ethernet (PPPoE) IP Extension Mode Default Private IP ISP (Internet Service Provider) STM-1 Loop Ethernet Dynamic Public IP assigned by BRAS AAA BRAS DSLAM ADSL Router Hub PC(S) RDAIUS Server *BRAS: Broadband Remote Access Server PPP over Ethernet PPPoE IP Extension Mode Description: In this deployment environment, the PPPoE session is between the ADSL WAN interface and BRAS. The ADSL Router acts as a bridge and gets a public IP address from BRAS for your computer. And only the one that got the public IP address is allowed to access into Internet. The real IP that you got is acquired from ISP. Moreover, no NAT translation will be done at this case. Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Advanced - Internet - Connections. And click Add. 3. Type in the VCI and VPI value. Then click the Next button. eg: VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the PPP over Ethernet (PPPoE) then click the Next button. 5. In the WAN IP Settings page, select Obtain an IP address automatically, uncheck Enable NAT box and check PPP IP extension then click Next. 6. In the PPP Username and Password page, enter the PPP username and password that you got from your ISP. Select Dial on Demand and type in the number for inactivity timeout. The default is 20. Or select Always on. Then click Next. 7. In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. And click Next. eg: Primary IP address: Subnet Mask: Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 56

65 Chapter 3:Accessing Internet Numbered IP over ATM (IPoA) Default Private IP ISP STM-1 Loop (Internet Service Provider) RDAIUS Server AAA BRAS DSLAM ADSL Router Hub S/W PC(S) *BRAS: Broadband Remote Access Server IP over ATM Public IP Pre-assigned by ISP Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN. The following example uses the LAN IP address ranging from to and the subnet mask for LAN is The WAN address is , and the subnet mask for WAN is Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Type in the VCI and VPI value. Then click the Next button. VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the IP over ATM (IPoA) then click the Next button. 4. In the WAN IP Settings page, select Use the following IP address and type in the IP address, subnet mask and gateway that you got from ISP. Then, select Use the following DNS Server Address. Type in the Primary DNS server and Secondary DNS server. Uncheck Enable NAT. Click Next for next page. WAN IP Address: WAN Subnet Mask: Primary DNS server: Secondary DNS server: In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Primary IP Address: Subnet mask: Start IP Address: End IP Address: Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next. Secondary IP Address: Subnet mask:

66 ADSL Router User Manual 7. Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 8. Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg: IP Address: Subnet Mask: Gateway: Now the router is well configured. You can access into Internet. 58

67 Chapter 3:Accessing Internet Numbered IP over ATM (IPoA)+NAT Description: In this deployment environment, we make up a private IP network of NAT function is enabled (on ADSL Router or use another NAT box connected to hub) to support multiple clients to access the Router and some public servers (WWW, FTP). If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN. The following example uses the LAN IP address ranging from to and the subnet mask for LAN is The WAN address is , and the subnet mask for WAN is Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Type in the VCI and VPI value. Then click the Next button. VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the IP over ATM (IPoA) then click the Next button. 4. In the WAN IP Settings page, select Use the following IP address and type in the IP address, subnet mask and gateway that you got from ISP. Then, select Use the following DNS Server Address. Type in the Primary DNS server and Secondary DNS server. WAN IP Address: WAN Subnet Mask: Primary DNS server: Secondary DNS server: Check the Enable NAT box. And click Next. 6. In the Configure LAN side Settings page, type in the IP address and subnet mask for your 59

68 ADSL Router User Manual LAN. Primary IP Address: Subnet mask: Start IP Address: End IP Address: Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next. Secondary IP Address: Subnet mask: Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 9. Now the router is well configured. You can access into Internet. 60

69 Chapter 3:Accessing Internet Unnumbered IP over ATM (IPoA) Default Private IP ISP STM-1 Loop (Internet Service Provider) S/W RDAIUS Server AAA BRAS DSLAM ADSL Router Hub PC(S) *BRAS: Broadband Remote Access Server IP over ATM Public IP Pre-assigned by ISP Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN. The following example uses the LAN IP address ranging from to and the subnet mask for LAN is The WAN address is , and the subnet mask for WAN is In such circumstance, we do not assign any WAN IP. Configuration: 1. Start up your browser and type as the address to enter this ADSL web-based manager. 2. Go to Quick Start -Quick Setup. Uncheck Auto Scan Internet Connection (PVC).Type in the VCI and VPI value. Then click the Next button. VPI 0 VCI On the Configure Internet Connection -Connection Type page, select the IP over ATM (IPoA) then click the Next button. 4. In the WAN IP Settings page, select None for WAN IP address settings. Then, select Use the following DNS Server Address. Type in the Primary DNS server and Secondary DNS server. Uncheck Enable NAT. Then Click Next for next page. Primary DNS server: Secondary DNS server: In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Primary IP Address: Subnet mask: Start IP Address: End IP Address: Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next. Secondary IP Address: Subnet mask: Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. 61

ITU G.992.3 Annex A (G.dmt.bis) ITU G.992.4 Annex A (G.lite.bis) Maximum Rate: 12 Mbps for downstream and 1.5 Mbps for upstream

Arion B3100-4G 802.11b/g Wireless ADSL/ADSL2/ADSL2+ Router Your NGN CPE Solution Provider Arion B3100-4G Wireless ADSL2+ Router is a DSL broadband access device which allows ADSL connectivity while providing

More information

ADSL2+ Wireless Modem Router User Manual

ADSL2+ Wireless Modem Router User Manual RTA1025W U RTA1025W ADSL Router User s Manual Version 2.4 Mar. 3, 2007 ADSL Router User Manual Copyright Notice 2005 All rights reserved. No part of this document

More information

NETCOMM GATEWAY TM SERIES ADSL2+ Modem Routers

NETCOMM GATEWAY TM SERIES ADSL2+ Modem Routers USER GUIDE Table of Contents Preface... 4 NB6 Series Package Contents... 5 Before You Use... 7 Subscription for ADSL Service... 7 Chapter 1: Overview... 9

More information

DSL-2600U. User Manual V 1.0

DSL-2600U User Manual V 1.0 CONTENTS 1. OVERVIEW...3 1.1 ABOUT ADSL...3 1.2 ABOUT ADSL2/2+...3 1.3 FEATURES...3 2 SPECIFICATION...4 2.1 INDICATOR AND INTERFACE...4 2.2 HARDWARE CONNECTION...4 2.3 LED STATUS

More information

DSL-520T ADSL Router User Guide

DSL-520T ADSL Router User Guide May 2006 ESL520TEU.A1G Table Of Contents BEFORE YOU START...1 Installation Overview...1 Setup Wizard...1 Packing List...1 Installation Notes...2 INTRODUCTION...5 Router

More information

DSL-502T ADSL Router User s Guide

DSL-502T ADSL Router User s Guide (December 2004) 651SL502T045 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

More information

RedRapid X WIRELESS MODEM ROUTER. Quick Installation Guide (DN-7060)

RedRapid X WIRELESS MODEM ROUTER Quick Installation Guide (DN-7060) 1. Product Introduction Congratulations on purchasing this Wireless N ADSL2/2+ Router. This router is a cost-effective ADSL2+ router,

More information

User Manual. PePWave Surf / Surf AP Indoor Series: Surf 200, E200, AP 200, AP 400. PePWave Mesh Connector Indoor Series: MC 200, E200, 400

User Manual PePWave Surf / Surf AP Indoor Series: Surf 200, E200, AP 200, AP 400 PePWave Mesh Connector Indoor Series: MC 200, E200, 400 PePWave Surf AP Series: Surf AP 200-X, E200-X, 400-X PePWave Surf

More information

Prestige 660R-6x Read Me First

Prestige 660R-6x Read Me First Prestige Rear Panel Connections DSL PORT CONNECTION Connect the DSL port on the Prestige to the wall jack using the included DSL cable (telephone wire). Connect the micro

More information

Prestige 623R-T. Quick Start Guide. ADSL Dual-link Router. Version 3.40

Prestige 623R-T ADSL Dual-link Router Quick Start Guide Version 3.40 February 2004 Introducing the Prestige The Prestige 623R-T ADSL Dual-link Router is the ideal all-in-one device for small networks connecting

More information

DSL-G604T Wireless ADSL Router

This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DSL-G604T Wireless ADSL Router Before You Begin 1. If you purchased this Router to share

More information

TL-PS310U Single USB 2.0 Port MFP and Storage Server

TL-PS310U Single USB 2.0 Port MFP and Storage Server Rev: 2.0.0 1910010313 Contents Chapter 1 Introduction... 1 1.1 Product Overview...1 1.2 Network Management...1 1.3 Components and Features...1 1.4 Hardware

More information

ADSL MODEM. User Manual V1.0

ADSL MODEM User Manual V1.0 CONTENTS 1.OVERVIEW... 3 1.1 ABOUT ADSL... 3 1.2 ABOUT ADSL2/2+... 3 1.3 FEATURES... 3 2 SPECIFICATION... 4 2.1 INTERFACE INTRODUCTION... 4 2.1.1 INDICATOR AND INTERFACE...

More information

DSL-2500U. D-Link. User Manual. ADSL2/2+ Ethernet Router. RECYCLABLE 2006/08/30 Ver. 1.00. Building Networks for People

D-Link DSL-2500U ADSL2/2+ Ethernet Router User Manual Building Networks for People RECYCLABLE 2006/08/30 Ver. 1.00 Table of Contents GENERAL INFORMATION... 3 Package Contents... 3 Important Safety Instructions...

More information

Prestige 650R-31/33 Read Me First

Prestige 650R-31/33 Read Me First Prestige Rear Panel Connections PORT DSL CONSOLE LAN 10/100M POWER Connect to a telephone jack using a telephone wire. CONNECTION Connect to a serial port (COM port) on

More information

DSL-504T ADSL Router User s Guide

DSL-504T ADSL Router User s Guide March 2005 651SL504T045 i FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

More information

WUA-0605 300Mbps Wireless USB Network Adapter

WUA-0605 300Mbps Wireless USB Network Adapter User Manual V1.0 Certification FCC CE FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

More information

Router Setup Manual. NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17

NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows,

More information

Ethernet Radio Configuration Guide

Ethernet Radio Configuration Guide for Gateway, Endpoint, and Repeater Radio Units April 20, 2015 Customer Service 1-866-294-5847 Baseline Inc. www.baselinesystems.com Phone 208-323-1634 FAX 208-323-1834

More information

Congratulations on your HomePortal purchase. To install your HomePortal and configure your home network, follow these steps.

Notice to Users 2003 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. 2WIRE PROVIDES

More information

Table of Contents. D-Link DSL-2500U User Manual 1

Table of Contents D-Link DSL-2500U User Manual 1 Table of Contents PACKAGE CONTENTS...3 SYSTEM REQUIREMENTS...3 FEATURES...4 HARDWARE OVERVIEW...6 Connections...6 LEDs...7 INSTALLATION...8 BEFORE YOU BEGIN...8

More information

DSL-584T ADSL2+ Router User Guide

DSL-584T ADSL2+ Router User Guide January 2006 ESL584TEU.A1G FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

More information

Wireless Router Setup Manual

Wireless Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10082-02 2006-04 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,

More information

IEEE 802.11b WLAN PC Card

IEEE 802.11b WLAN PC Card User s Guide Version: 1.3 August 2001 Please install the Utility/Driver first before inserting the PCMCIA Card. FCC Class B Radio Frequency Interference Statement The manufacturer

More information

USB/Ethernet. DSL Gateway. Model #: GT704. Firmware Version: 3.0.1.0.5.6d-GT704-WG. User Manual. Ver 2.0. Solutions for the Digital Life

USB/Ethernet DSL Gateway Model #: GT704 Firmware Version: 3.0.1.0.5.6d-GT704-WG User Manual Ver 2.0 Solutions for the Digital Life Table of Contents 1 Introduction 1 Package Contents 1 Minimum System Requirements

More information

Table of Contents. Table of Contents. D-Link DSL-526B User Manual 2

Table of Contents Package Contents... 3 System Requirements... 3 Features... 4 Hardware Overview... 5 Connections... 5 Hardware Overview... 6 LEDs... 6 Installation... 7 Before You Begin... 7 Installation

More information

Copyright. Trademarks

1 Port ADSL2/2+ Router User Manual FOR ANNEX A/B Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated

More information

C2-010/C2-010-I ADSL2+ Router

s C2-010/C2-010-I ADSL2+ Router User s Manual Rev: 1.3 2005/1210 No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names

More information

Chapter 3 Connecting the Router to the Internet

Chapter 3 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to configure your DG834GT

More information

SIEMENS ADSL E-110/E-110-I. User Manual. ETH & USB ComboRouter. Rev:01_040220 2004-02-20

SIEMENS ADSL E-110/E-110-I ETH & USB ComboRouter User Manual Rev:01_040220 2004-02-20 No part of this publication may be reproduced in any form by any means without the prior written permission from Siemens

More information

P-660HN-51. 802.11n Wireless ADSL2+ 4-port Gateway DEFAULT LOGIN DETAILS. Firmware Version 1.10 Edition 1, 9/2010. IP Address: http://192.168.1.

P-660HN-51 802.11n Wireless ADSL2+ 4-port Gateway Firmware Version 1.10 Edition 1, 9/2010 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 User Name: admin Password: 1234 www.zyxel.com Copyright 2010

More information

Technical Reference / User Guide

/ User Guide Copyright Copyright 2006 OPEN Networks Pty Ltd. All rights reserved. The content of this manual is subject to change without notice. The information and messages contained herein are proprietary

More information

ADSL Modem/Router. with USB and 10/100M LAN Port. User s Manual

ADSL Modem/Router with USB and 10/100M LAN Port User s Manual Table of Content CHAPTER 1... 1 INTRODUCTION... 1 1.1 An Overview of the ADSL Modem/Router... 1 1.2 Package Contents... 2 1.3 The ADSL Modem/Router

More information

Preparing the Computers for TCP/IP Networking

Configuration Preparing the Computers for TCP/IP Networking Configuring Windows 98, and ME for TCP/IP Networking Verifying TCP/IP Properties Configuring Windows 2000 or XP for IP Networking Install or

More information

your Gateway Windows network installationguide 802.11b wireless series Router model WBR-100 Configuring Installing

your Gateway Windows network installationguide 802.11b wireless series Router model WBR-100 Installing Configuring Contents 1 Introduction...................................................... 1 Features...........................................................

More information

Prestige 202H Plus. Quick Start Guide. ISDN Internet Access Router. Version 3.40 12/2004

Prestige 202H Plus ISDN Internet Access Router Quick Start Guide Version 3.40 12/2004 Table of Contents 1 Introducing the Prestige...3 2 Hardware Installation...4 2.1 Rear Panel...4 2.2 The Front Panel

More information

Broadband Router ESG-103. User s Guide

Broadband Router ESG-103 User s Guide FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits

More information

USB/Ethernet DSL Modem Model #: GT701 User Manual

USB/Ethernet DSL Modem Model #: GT701 User Manual Solutions for the Digital Life Table of Contents 1 Introduction 1 Package Contents 1 Minimum System Requirements 2 Features 2 Getting to Know the Modem

More information

UTStarcom UT-300R2U. ADSL Modem. UTStarcom, Inc. USER GUIDE. Release: 1.0. Doc. Code:

UTStarcom UT-300R2U ADSL Modem USER GUIDE Release: 1.0 Doc. Code: UTStarcom, Inc. Copyright 2005 UTStarcom, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any

More information

TD-8610/TD-8610B External ADSL2+ MODEM

TD-8610/TD-8610B External ADSL2+ MODEM Rev: 1.0.2 1910010011 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other

More information

Preface. Manual Revisions. Trademarks

Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions

More information

DSL Modem. User Manual. Solutions for the Digital Life. Model #: GT701D. Ver 1.0

DSL Modem Model #: GT701D User Manual Ver 1.0 Solutions for the Digital Life Table of Contents 1 Introduction 1 Minimum System Requirements 1 Features 2 Getting to Know the Modem 3 2 Performing a Quick

More information

Table of Contents. D-Link DSL-2520U User Manual 1

Table of Contents D-Link DSL-2520U User Manual 1 Table of Contents PACKAGE CONTENTS... 3 SYSTEM REQUIREMENTS... 3 FEATURES... 4 HARDWARE OVERVIEW... 5 Connections... 5 LEDs... 6 INSTALLATION... 7 BEFORE

More information

Broadband ADSL2+ Modem DM111PSPv2

Broadband ADSL2+ Modem DM111PSPv2 User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2011 202-10913-01 v1.0 2011 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced,

More information

USB Mini Print Server PS121. Installation Guide

USB Mini Print Server PS121 Installation Guide Introduction Thank you for purchasing a NETGEAR PS121 USB Mini Print Server. With this print server you can share your printer with all the computers in your

More information

Creatix 802.11g Adapter CTX405 V.1/V.2 User Manual

Creatix 802.11g Adapter CTX405 V.1/V.2 User Manual 1 Safety instructions for Creatix 802.11g Adapter This equipment has been designed and tested in accordance with the requirements of Standard EN60950.

More information

MN-700 Base Station Configuration Guide

MN-700 Base Station Configuration Guide Contents pen the Base Station Management Tool...3 Log ff the Base Station Management Tool...3 Navigate the Base Station Management Tool...4 Current Base Station

More information

Quick Start Guide. WRV210 Wireless-G VPN Router with RangeBooster. Cisco Small Business

Quick Start Guide Cisco Small Business WRV210 Wireless-G VPN Router with RangeBooster Package Contents WRV210 Router Ethernet Cable Power Adapter Product CD-ROM Quick Start Guide Welcome Thank you for

More information

ADSL X5 U S E R S G U I D E

ADSL X5 U S E R S G U I D E NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted.

More information

Chapter 1 Installing the Gateway

Chapter 1 Installing the Gateway This chapter describes how to set up the wireless voice gateway on your Local Area Network (LAN), connect to the Internet, and perform basic configuration. For information

More information

HP-1000E v2. User s Manual. Powerline Ethernet Adapter. HP1000E v2 User s Manual

HP-1000E v2 Powerline Ethernet Adapter User s Manual HP1000E v2 User s Manual Table of Contents Chapter 1: Introduction...1 Chapter 2: Planning your Powerline Network...1 Network Topology...1 Chapter 3:

More information

Table of Contents. D-Link DSL-2650U User Manual

Table of Contents D-Link DSL-2650U User Manual i Table of Contents PACKAGE CONTENTS... 1 SYSTEM REQUIREMENTS... 1 FEATURES... 2 HARDWARE OVERVIEW... 3 Connections... 3 LEDs... 4 INSTALLATION... 5 BEFORE

More information

SPEED TOUCH PC. ADSL PC Network Interface Card. Installation Guide. Microsoft Windows 95A, 98 and NT4.0. VERSION 2.1.1 for CD-ROM Installation

SPEED TOUCH PC ADSL PC Network Interface Card Microsoft Windows 95A, 98 and NT4.0 VERSION 2.1.1 for CD-ROM Installation November 9, 1999 SPEED TOUCH PC ADSL PC Network Interface Card Microsoft Windows

More information

CPEi 800/825 Series. User Manual. * Please see the Introduction Section

CPEi 800/825 Series User Manual * Please see the Introduction Section Contents Introduction...iii Chapter 1: CPEi 800/825 User Guide Overview... 1-1 Powerful Features in a Single Unit... 1-2 Front of the

More information

ADSL Modem. User Guide AM200 (EU/LA) Model No. WIRED

WIRED User Guide Model No. AM200 (EU/LA) Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates

More information

Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual

Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA October 2014 208-10256-02 v1.0 Support Thank you for selecting NETGEAR products. After installing

More information

BiPAC 7404V series. VoIP/(802.11g) ADSL2+ (VPN) Firewall Router. Quick Start Guide

BiPAC 7404V series VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Quick Start Guide VoIP/(802.11g) ADSL2+ (VPN) Firewall Router For more detailed instructions on configuring and using the Billion VoIP/(802.11g)

More information

EPSON Network Image Express Card User s Guide

Network Scan Server English EPSON Network Image Express Card User s Guide All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or

More information

Chapter 2 Introduction

Chapter 2 Introduction This chapter describes the features of the NETGEAR 54 Mbps Wireless ADSL Modem Router Model DG834G. The Wireless ADSL Modem Router is a combination of a built-in ADSL modem, ADSL

More information

SOHOSpeed ADSL 1port / 4port Ethernet Router User s Manual Revision 2.0 February 2005

SOHOSpeed ADSL 1port / 4port Ethernet Router User s Manual Revision 2.0 February 2005 Copyright This manual may not be copied, photocopied, transmitted, or translated into language or computer language,

More information

ADSL Modem Router Setup Manual

ADSL Modem Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10026-01 2006-2 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,

More information

1. Hardware Installation

4 Port 10/100M Internet Broadband Router with USB Printer server Quick Installation Guide #4824904AXZZ0 1. Hardware Installation A. System Requirement Before you getting started, make sure that you meet

More information

DSL Self-install Kit Instructions

DSL Self-install Kit Instructions Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters on your telephone

More information

DSL-380T ADSL Modem User Guide

DSL-380T ADSL Modem User Guide January 2006 ESL380TEU.A1G FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

More information

DSL- G604T Frequently asked Questions.

DSL- G604T Frequently asked Questions. Cannot get connection to the router.... 2 Router is not communicating with the ISP... 6 Router shows connected but cannot browse the Internet.... 6 Part of the web

More information

2 Setting Up the Hardware for a Wired Ethernet Network... 13. 3 Setting Up the Software for an Ethernet Network... 21

Contents 1 Networking Basics............................................... 1 Selecting a network connection........................................ 2 Wired Ethernet network...........................................

More information

TD-8616 ADSL2+ Modem. Rev: 2.0.0 1910010591

ADSL2+ Modem Rev: 2.0.0 1910010591 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names

More information

Copyright. Trademarks

4 Ports ADSL2/2+ Router User Manual FOR ANNEX A/B Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated

More information

The following sections describe the Gateway configuration pages in the SBG1000 Setup Program.

Configuration Gateway > WAN Page Gateway: LAN nat config Page Gateway: LAN dhcp server config Page Gateway LOG Page Preparing the Network Preparing the Computers for TCP/IP Networking Configuring TCP/IP

More information

TD-8811 ADSL2+ Modem Router

ADSL2+ Modem Router Rev: 1.0.2 1910010224 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product

More information

RouteFinder SOHO. Quick Start Guide. SOHO Security Appliance. EDGE Models RF825-E, RF825-E-AP CDMA Models RF825-C-Nx, RF825-C-Nx-AP

RouteFinder SOHO SOHO Security Appliance EDGE Models RF825-E, RF825-E-AP CDMA Models RF825-C-Nx, RF825-C-Nx-AP Quick Start Guide RouteFinder RF825 Series Quick Start Guide RouteFinder SOHO Security Appliance

More information

GHz 2.4 802.11g. Wireless-G. User Guide. ADSL Gateway with 2 Phone Ports WIRELESS WAG54GP2. Model No.

GHz 2.4 802.11g WIRELESS Wireless-G ADSL Gateway with 2 Phone Ports User Guide Model No. WAG54GP2 Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark

More information

ADSL X6 U S E R G U I D E

ADSL X6 U S E R G U I D E NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. No

More information

Quick Installation Guide DSL-2750U/NRU. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch

DSL-2750U/NRU 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2750U/NRU Power adapter RJ-11 telephone cable Straight-through Ethernet cable (CAT 5E)

More information

Prestige 792H. G.SHDSL 4-port Security Gateway. Compact Guide Version 3.40(BZ.0) March 2004

G.SHDSL 4-port Security Gateway Compact Guide Version 3.40(BZ.0) March 2004 Table of Contents 1 Introducing the Prestige... 3 1.1 Certifications... 3 2 Hardware... 4 2.1 Rear Panel Connections... 4 2.2

More information

Table of Contents. D-Link DSL-2750U User Manual 1

Table of Contents D-Link DSL-2750U User Manual 1 Table of Contents PACKAGE CONTENTS... 4 SYSTEM REQUIREMENTS... 4 FEATURES... 5 HARDWARE OVERVIEW... 7 Connections... 7 LEDs... 8 INSTALLATION... 9 BEFORE

More information

PePWave Surf Series PePWave Surf Indoor Series: Surf 200, AP 200, AP 400

PePWave Surf Series PePWave Surf Indoor Series: Surf 200, AP 200, AP 400 PePWave Surf Outdoor Series: Surf AP 200/400-X, PolePoint 400-X, Surf 400-DX User Manual Document Rev. 1.2 July 07 COPYRIGHT & TRADEMARKS

More information

Check Your Package Contents. CD-ROM containing Manual and Warranty

This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVA-G3340S Wireless VoIP Router Before You Begin If you purchased this Router to share your

More information

Connecting to the Internet

Connecting to the Internet Connecting the Gateway to the Internet Configuration of TCP/IP Protocol Installing the USB Drivers Connecting Ethernet Network Devices Connecting USB Network Devices Connecting

More information

D-Link DSL-320B User Manual 2

Table of Contents Table of Contents TABLE OF CONTENTS...2 PACKAGE CONTENTS...3 SYSTEM REQUIREMENTS...3 FEATURES...4 HARDWARE OVERVIEW...5 Connections...5 LEDs...6 INSTALLATION...7 BEFORE YOU BEGIN...7

More information

PCMCIA Wireless LAN Card User s Manual

PCMCIA Wireless LAN Card User s Manual Rev 1.0 Regulatory compliance FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

More information

DSL-G804V Wireless ADSL Router User s Guide

DSL-G804V Wireless ADSL Router User s Guide (August 2005) ii TABLE OF CONTENTS About This User s Guide... v Before You Start... v Installation Requirements... v INTRODUCTION... 1 Router Description and

More information

Gigabit Content Security Router CS-5800

Gigabit Content Security Router CS-5800 Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Hardware Installation... 4 2.1 Safety Instruction... 4 2.2 Front panel... 4 2.3 LED & Button

More information

Vigor2800 Series ADSL2/2+ Security Router User s Guide

Vigor2800 Series ADSL2/2+ Security Router User s Guide Version: 3.2 Date: 2007/7/12 Copyright 2006 All rights reserved. This publication contains information that is protected by copyright. No part may

More information

Vigor 2700 Series Firewall Router User s Guide

Vigor 2700 Series Firewall Router User s Guide Version: 2.5 Date: 2007/03/19 Copyright 2006 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced,

More information

TD-8840 User Guide ADSL2+ Modem Router

TD-8840 User Guide ADSL2+ Modem Router Rev: 2.0.1 1910010192 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other

More information

Wireless Router Setup Manual

Wireless Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway August 2007 208-10147-01 v1.0 Trademarks NETGEAR and the NETGEAR logo are registered trademarks, and RangeMax and Smart Wizard are

More information

AC1600 WiFi VDSL/ADSL Modem Router

AC1600 WiFi VDSL/ADSL Modem Router Model D6400 User Manual May 2015 202-11485-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device,

More information

High Speed Internet DSL Modem GT701C. User s Manual

High Speed Internet DSL Modem GT701C User s Manual Table of Contents 1 Introduction 1 Minimum System Requirements 1 Features 2 Getting to Know the Modem 3 2 Performing a Quick Setup 7 Accessing Quick Setup

More information

N300 Wireless Gigabit Router Setup Manual

N300 Wireless Gigabit Router Setup Manual NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA June 2010 208-10443-03 v1.0 2010 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and the NETGEAR

More information

Table of Contents. D-Link DSL-2640U User Manual 1

Table of Contents D-Link DSL-2640U User Manual 1 Table of Contents PACKAGE CONTENTS... 4 SYSTEM REQUIREMENTS... 4 FEATURES... 5 HARDWARE OVERVIEW... 7 Connections... 7 LEDs... 8 INSTALLATION... 9 BEFORE

More information

AC 750. Wireless Dual Band ADSL2+ Modem Router. Highlights

AC 750 Wireless Dual Band ADSL2+ Modem Router Highlights 750Mbps Wireless Speed 300Mbps on 2.4GHz + 433Mbps on 5GHz Broad Coverage 2 external antennas provide maximum omni-directional wireless coverage

More information

TW100-BRV204 VPN Firewall Router

TW100-BRV204 VPN Firewall Router Cable/DSL Internet Access 4-Port Switching Hub User's Guide Table of Contents CHAPTER 1 INTRODUCTION... 1 TW100-BRV204 Features... 1 Package Contents... 3 Physical Details...

More information

Broadband Router ALL1294B

Broadband Router ALL1294B Broadband Internet Access 4-Port Switching Hub User's Guide Table of Contents CHAPTER 1 INTRODUCTION... 1 Broadband Router Features... 1 Package Contents... 3 Physical Details...

More information

The Product Description of SmartAX. MT882 ADSL2+ Router

The Product Description of SmartAX MT882 ADSL2+ Router HUAWEI Huawei Technologies Co., Ltd Table of Contents Product Description...1 1. Preface...1 2. Highlights...1 3. Features and Benefits...2 4. Technical

More information

2Wire Gateway Installation Guide. For 1000 Series

Siemens Adsl Sl2-141-i Firmware

2Wire Gateway Installation Guide For 1000 Series Notice to Users 2005 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machinereadable

More information

TD-8810 External ADSL2+ Router

External ADSL2+ Router Rev: 1.1.2 1910010007 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product

More information

N600 Wireless Dual Band Gigabit Router WNDR3700v2 Setup Manual

N600 Wireless Dual Band Gigabit Router WNDR3700v2 Setup Manual 2010 by NETGEAR, Inc. All rights reserved. NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA October 2010 208-10737-01 v1.0 Trademarks

More information

ADSL Modem. HM210dp/di. User Guide

ADSL Modem HM210dp/di User Guide ADSL Modem HM210dp/di. User Guide Copyright Ericsson AB 2003 All Rights Reserved Disclaimer The contents of this document are subject to revision without notice due to

Siemens Adsl Sl2 141 I Firmware Download

More information

Belkin Wireless Cable/DSL Gateway Router

Siemens Adsl Sl2 141 I Firmware Update Download

Belkin Wireless Cable/DSL Gateway Router User Manual F5D6230-3 Table of Contents Introduction................................................ 1-3 Knowing your Belkin Router....................................

Siemens Adsl Sl2-141 Firmware Upgrade

More information